How to Buy print this page print

Configure Vertical Service Codes in Regional Voice Parameters on SPA112 and SPA122

Article ID: 2772

Objectives

A vertical service code is a special code dialed to a telephone number which provides special phone features. Vertical service announcement code is a special feature that allows the user to listen to a record on the line before the call is connected when the user enters the code. The star code is activated by * code and the phone is off hook.

The objective of this article is to explain how to configure vertical service parameters in regional voice settings on a SPA112 or a SPA122. This is helpful to adjust shortcuts, such as the keys required to perform a call redial.

Applicable Devices

• SPA112
• SPA122

Software Version

• 1.3.2 (014)

Vertical Service Codes in Regional Voice Parameters

Step 1. Log in to the Phone Adapter Configuration Utility and choose Voice > Regional. The Regional page opens:



Note: Scroll down to the Vertical Service Activation Codes section to configure the desired codes.

Note: Scroll down to the Vertical Service Announcement Codes section to configure the desired codes .

Vertical Service Activation Codes

Step 2. Enter a value in the Call Return Code field. This code calls the last caller. The default is *69.

Step 3. Enter a value in the Call Redial Code field. This code redials the last number called. The default is *07.

Step 4. Enter a value in the Blind Transfer Code field. This code begins a blind transfer of the current call to the specified extension. The default is *98.

Step 5. Enter a value in the Call Back Act Code field. This code starts a callback when the last outbound call is not busy. The default is *66.

Step 6. Enter a value in the Call Back Deact Code field. This code cancels a callback. The default is *86.

Step 7. Enter a value in the Call Back Busy Act Code field. This code starts a callback when the last outbound call is busy. The default is *05.

Step 8. Enter a value in the Cfwd All Act Code field. This code forwards all calls to the specified extension. The default is *72.

Step 9. Enter a value in the Cfwd All Deact Code field. This code cancels call forwarding of all calls. The default is *73.

Step 10. Enter a value in the Cfwd Busy Act Code field. This code forwards busy calls to the specified extension. The default is *90.

Step 11. Enter a value in the Cfwd Busy Deact Code field. This code cancels call forwarding of busy calls. The default is *91.

Step 12. Enter a value in the Cfwd No Ans Act Code field. This code forwards no-answer calls to the specified extension. The default is *92.

Step 13. Enter a value in the Cfwd No Ans Deact Code field. This code cancels call forwarding of no-answer calls. The default is *93.

Step 14. Enter a value in the Cfwd Last Act Code field. This code forwards the last inbound or outbound calls to the specified extension. The default is *63.

Step 15. Enter a value in the Cfwd Last Deact Code field. This code cancels call forwarding of the last inbound or outbound calls. The default is *83.

Step 16. Enter a value in the Block Last Act Code field. This code blocks the last inbound call. The default is *60.

Step 17. Enter a value in the Block Last Deact Code field. This code cancels blocking of the last inbound call. The default is *80.

Step 18. Enter a value in the Accept Last Act Code field. This code accepts the last outbound call. The default is *64.

Step 19. Enter a value in the Accept Last Deact Code field. This code cancels the code to accept the last outbound call. The default is *84.

Step 20. Enter a value in the CW Act Code field. This code enables call waiting on all calls. The default is *56.

Step 21. Enter a value in the CW Deact Code field. This code disables call waiting on all calls. The default is *57.

Step 22. Enter a value in the CW Per Call Act Code field. This code enables call waiting on the next call. The default is *71.

Step 23. Enter a value in the CW Per Call Deact Code field. This code disables call waiting on the next call. The default is *70.

Step 24. Enter a value in the Block CID Act Code field. This code blocks caller ID on all outbound calls. The default is *67.

Step 25. Enter a value in the Block CID Dect Code field. This code removes caller ID blocking on all outbound calls. The default is *68.

Step 26. Enter a value in the Block CID Per Call Act Code field. This code enables caller ID blocking on the next outbound call. The default is *81.

Step 27. Enter a value in the Block CID Per Call Deact Code field. This code removes blocking on the next outbound call. The default is *82.

Step 28. Enter a value in the Block ANC Act Code field. This code blocks all anonymous calls. The default is *77.

Step 29. Enter a value in the Block ANC Deact Code field. This code removes blocking of all anonymous calls. The default is *87.

Step 30. Enter a value in the DND Act Code field. This code enables the do not disturb feature. The default is *78.

Step 31. Enter a value in the DND Deact Code field. This code disables the do not disturb feature. The default is *79.

Step 32. Enter a value in the CID Act Code field. This code enables caller ID generation. The default is *65.

Step 33. Enter a value in the CID Deact Code field. This code disables caller ID generation. The default is *85.

Step 34. Enter a value in the CWCID Act Code field. This code enables call waiting, caller ID generation. The default is *25.

Step 35. Enter a value in the CWCID Deact Code field. This code disables call waiting, caller ID generation. The default is *45.

Step 36. Enter a value in the Dist Ring Act Code field. This code enables the distinctive ringing feature. The default is *26.

Step 37. Enter a value in the Dist Ring Deact Code field. This code disables the distinctive ringing feature. The default is *46.

Step 38. Enter a value in the Speed Dial Act Code field. This code assigns a speed dial number. The default is *74.

Step 39. Enter a value in the Paging Code field. This code is used for paging other clients in the group. The default is *96.

Step 40. Enter a value in the Secure All Call Act Code field. This code makes all outbound calls secure. The default is *16.

Step 41. Enter a value in the Secure No Call Act Code field. This code makes all outbound calls not secure. The default is *17.

Step 42. Enter a value in the Secure One Call Act Code field. This code makes the next outbound call secure. The default is *18.

Step 43. Enter a value in the Secure One Call Deact Code field. This code makes the next outbound call not secure. The default is *19.

Step 44. Enter a value in the Conference Act Code field. If this code is specified, the user must enter it before dialing the third party for a conference call. Enter the code for a conference call.

Step 45. Enter a value in the Attn-Xfer Act Code field. If this code is specified, the user must enter it before dialing the third party for a call transfer. Enter the code for a call transfer.

Step 46. Enter a value in the Modem Line Toggle Code field. This code toggles the line to a modem. The default is *99.

Step 47. Enter a value in the FAX Line Toggle Code field. This code toggles the line to a fax machine. The default is #99.

Step 48. Enter a value in the Media Loopback Code field. This code is used for media loopback. The default is *03.

Step 49. Enter a value in the Referral Services Codes field. This code is used when a user puts a current call on hold and is listening for the second dial tone. This code has a maximum length of 79 characters and should not conflict with another Service Activation Code. One or more start codes can be configured in this field. Example, *98 or *97|*98|*123, etc.

Step 50. Enter a value in the Feature Dial Services Codes field. This code provides the user with what should be done when listening to the first or second dial. This code has a maximum length of 79 characters. This field can be configured with one or more codes. Example,*98 or *97|*98|*123, etc.

Step 51. Click the Submit button to save changes.


Vertical Service Announcement Codes

Step 2. Enter a value in the Service Annc Base Number field. This is the base number used for service announcements. The default setting is blank.

Step 3. Enter a value in the Service Annc Extension Codes field. These are the extension codes used for service announcements. The extension codes have a specific pattern the can follow. Examples include CWT: 00; CWF: 20; FAT: 18; FAF: 08; FBT: 01; FBF: 12; FNT: 50; FNF: 15.

• CWT — Used to designate that the Call Waiting feature is enabled.

• CWF — Used to designate that the Call Waiting feature is disabled.

• FAT— Used to designate that the Call Forward All feature is enabled.

• FAF— Used to designate that the Call Forward All feature is disabled.

• FBT — Used to designate that the Call Forward Busy feature is enabled.

• FBF— Used to designate that the Call Forward Busy feature is disabled.

• FNT — Used to designate that the Call Forward no answer feature is enabled.

• FNF — Used to designate that the Call Forward no answer feature is disabled. The default setting is blank.

Step 4. Click the Submit button to save changes.



Still need help? Try Guide Me Troubleshooting!

 

© 2018 Cisco Systems, Inc. All rights reserved.